PRL Motorsports High Volume Intake System – 2015–2025 Ford F-150 2.7L & 2015–2016 3.5L EcoBoost

PRL.1130.1.0

$369.00
$369.00
Shipping calculated at checkout.

I have read Axion's store policies on returns, refunds, and cancellations. I also understand that when marked on the product page, special order items may not be canceled for any reason.

  • Fully secure checkout
  • Trusted by thousands
  • Rated and reviewed

FITS: 

  • 2015–2025 Ford F-150 2.7L
  • 2015–2016 Ford F-150 3.5L EcoBoost

The PRL High Volume Intake System for the 2015–2025 Ford F-150 2.7L EcoBoost and 2015–2016 3.5L EcoBoost is built to eliminate the airflow restrictions of the factory intake and deliver power where it counts. Featuring dual 4-inch roto-molded intake runners with integrated bell-mouth filters, this system ensures smooth and consistent airflow to each turbocharger—even under load.

An oversized roto-molded airbox nearly doubles the volume of the factory unit and seals directly to the hood, providing a direct cold air feed. The entire system is designed to bolt in place using factory mounting points, with OEM-level fit and finish for long-term reliability and easy serviceability. Whether towing, daily driving, or wide-open throttle, this system delivers consistent results and proven airflow gains.

Dyno testing on a 2018 3.5L EcoBoost F-150 showed consistent gains across the RPM range. On average, the PRL intake produced +8 horsepower and +12 lb-ft of torque at 4000 RPM, +8 horsepower and +8 lb-ft at 6000 RPM, and an impressive +22 horsepower and +17 lb-ft of torque at redline compared to stock. Peak improvements of +5.5 horsepower and +3.86 lb-ft were also recorded.

When paired with the PRL Intercooler, results climbed even higher: +50 horsepower and +40 lb-ft of torque at redline with power gains starting around 5300 RPM. The intake is designed not only for peak numbers but also to deliver consistent power throughout the rev range.

Key Features

  • Dual 4-inch intake runners feeding each turbo
  • High-flow cotton and steel mesh filters with bell-mouth inlets
  • Oversized roto-molded airbox that seals to the hood
  • Smooth-flowing curves with stepped silicone for efficient airflow
  • Direct bolt-on fitment with no cutting or trimming required
  • Filters mount directly to the airbox for easy servicing
  • Designed for top-end power without sacrificing drivability

Materials

  • Roto Molded HDPE Airbox and Intake Tubes
  • 304 Stainless Aluminum Sheet Metal Components
  • 5-Layer Reinforced Silicone Couplers
  • 304 Stainless Steel Clamps
  • Anodized Aluminum Dress-Up Washers
  • Stainless Steel Hardware and Nylon Rivets
  • Rubber Gaskets and Grommets

Fitment

  • 2015–2025 Ford F-150 2.7L EcoBoost
  • 2015–2016 Ford F-150 3.5L EcoBoost

NOTE: Does Not Fit Power-boost Models

What’s Included

  • (2) PRL Intake Filters
  • (2) Roto-molded Intake Tubes (Driver/Passenger)
  • (4) Application-specific Silicone Couplers
  • (1) Roto-molded Airbox with Threaded Inserts
  • (1) Aluminum Filter Retainer
  • (2) Stainless Steel Brackets 
  • (1) Rubber Grommet and Gasket
  • Full Hardware Pack (Clamps, Screws, Washers, Rivets)

*Planned submission for testing with SEMA Garage for CARB emissions compliance.

PRL Motorsports High Volume Intake System – 2015–2025 Ford F-150 2.7L & 2015–2016 3.5L EcoBoost

$369.00

How fast is shipping?

Most orders placed on a weekday before 1pm EST will ship out the same day. Otherwise, it is common for parts to ship in 2-3 days from order date. Please note that both of these exclude special order items, which are clearly marked on product pages.

What is the returns policy?

Most products sold by Axion Industries LLC are covered by our Standard Return Policy and may be returned within 30 days of the original invoice date for a refund. Please note that a restocking fee will apply (see "Refunds Policy" in FAQ).

All returns require written approval from Axion Industries LLC. Original Shipping and return shipping charges are strictly non-refundable. For more information regarding our shipping refund policy, please refer to the "Refunds Policy" on FAQ.

Does it come with a warranty?

Axion Industries LLC does not offer any type of warranty coverage for defective products except those that are manufactured by us. However, the majority of the products available through our website are covered separately under a manufacturer's warranty.

If you recently purchased a product from Axion Industries LLC and are concerned about the fitment or performance of your item, please contact us for assistance.

Our customer service representatives can provide limited support, advice, and assistance identifying the possibility of any manufacturer defects. If we suspect your product does have serious defects, our customer service department can serve as a contact with the manufacturer to help arrange a warranty inspection and, if applicable, any necessary repairs or replacement shipments.

If you wish, you may also contact the manufacturer directly for information regarding product eligibility and specific terms and conditions of warranty coverage.

What happens if I want to cancel?

Unfulfilled, cancelled orders will require a 10%-30% cancellation fee unless you choose store credit (a 5%-15% cancellation fee will apply in this case). This fee is to:

  1. Recover the processing fees for both the order you placed and the order
    you canceled.
  2. Cancellation fees imposed by the manufacturer, should the part be coming
    straight from them. OR
  3. Restocking fees, since the part now has to be resold.

The following may NOT be canceled:

  • Orders that are already fulfilled – the Returns Policy will apply.
  • Pre-orders - the Returns Policy will apply.
  • Special Order items that were approved for sourcing by the customer.
  • Items that are on sale and labeled "final sale" during that sale period.

Please see "Order Cancellation" under FAQ for more.