Paragon Track Performance Big Brake Kit (PA015 / PA035 6 piston) - Honda Civic Type R FK8/FL5 Front

FITS:

• 10th Gen Honda Civic Type-R
• 11th Gen Honda Civic Type-R
• 5th Gen Acura Integra Type-S

BEFORE ORDERING: By adding this product to cart, I agree that brake kits are not returnable due to fitment issues. May not be compatible with aftermarket suspension upgrades (e.g. extended ball joints). Please contact us if you are unsure about fitment.

NOTE: Excessive parting lines/flash on the knuckle may have to be slightly grinded down before installation. The bracket should sit flush against the knuckle.

Paragon Track Performance Big Brake Kits offer superior braking performance specifically designed for track day enthusiasts, and is a significant upgrade from the OEM Type R setup. Come complete with every component required to upgrade your front brake system. Developed with performance, quality, and longevity in mind, only the finest materials/components were used to ensure the brake kits to perform and last under both street and track conditions.

Features

• Paragon PA015 / PA035 6 piston calipers.
• Fully-floating 2-piece rotors, with 72 directional ventilation vanes for optimal cooling performance. Runs up to 30% cooler than O.E. rotors.
• Hard anodized/ENP nickel plated calipers, and hard anodized rotor hats for increased resistance to wear and discoloration under extreme track conditions.
• Piston sizes optimized for each application. Designed to work flawlessly with OEM ABS and brake master cylinder. Compatible with OEM rear brakes. Minimal change in brake bias.
• Confidence-inspiring heat resistance during extended sessions. Optimum bite, modulation characteristics, thermal stability, and durability.
• Saves 8.8 lbs of unsprung weight vs. OEM (17-19 models, 355mm kit).
• Recommended usage: Street / Track.
• Complete pre-assembled axle set.

Includes:

• One pair of Paragon PA015 / PA035 6 piston calipers (hard anodized/ENP nickel plated) *Only difference between the PA015 and PA035 calipers is the maximum rotor size they can accommodate.
• One pair of Paragon 72 vane fully-floating 2-piece rotor assemblies with hard anodized 6061-T6 aerospace grade aluminum hats, stainless steel bobbins, and anti-rattle clips.
• One set of Paragon P3 "Street/Track" semi-metallic brake pads (manufactured by Winmax Japan, other compounds available at additional cost).
• One pair of caliper mounting brackets and all necessary hardware.
• One pair of Goodridge DOT approved stainless steel braided brake lines.
• One set of caliper anti rattle clips.
• Detailed installation manual

***Please verify wheel fitment / clearance before ordering. All Paragon big brake kits are custom made/packaged to order, and cannot be returned due to wheel fitment issues.

Wheel Fitment Template Download (PDF): 355x32mm / 370x36mm

> How to use the wheel fitment template (PDF)

**355mm and 370mm brake kits generally require 18" or larger wheels. Fitment varies due to different specs / wheel design. Verify fitment with wheel fitment template.

355mm kit test fit approved wheels:

• OEM FK8 20x8.5 +60
• Rays GramLights 57CR 18x9.5 +38
• Rays NE24 CS 19x9.5 +44
• Rays G025 19x9.5 +44
• Volk Racing TE37 Saga 18x10 +40
• Volk Racing TE37 Saga 18x11 +37 (System Motorsports spec)
• Volk Racing CE28 Club Racer II 18x9.5 +38
• Volk Racing TE37UL M spec 19x9.5 +36
• Superspeed RF05RR 18x9.5 +38
• Mugen MF10 18x9.5 +45
• Apex VS-5RS 18x10.5 +40 / 19x9.5 +45
• Desmond Regamaster EVO 18x10 +50
• Titan 7 T-D6 18x9.5 +45
• Titan 7 T-C5 18x9.5 +45
• BBS SR 18x8
• Enkei TS-7 18x9.5 +45
• Sparco ProCorsa 18x9 +39

370mm kit test fit approved wheels:

• OEM FL5 19x9.5 +60
• Titan 7 T-S5 19x9.5 +45