Hybrid Racing Clutch Master Cylinder Upgrade

HYB-CMC-01-20

$289.99
$289.99
Shipping calculated at checkout.

I have read Axion's store policies on returns, refunds, and cancellations. I also understand that when marked on the product page, special order items may not be canceled for any reason.

  • Fully secure checkout
  • Trusted by thousands
  • Rated and reviewed

FITS: 1st Gen Acura TSX

BEFORE ORDERING: This is not suitable for RHD vehicles. 

The Hybrid Racing Clutch Master Cylinder Upgrade kit for the 2004-2008 Acura TSX is a straightforward bolt-on part that includes an OE Nissin CMC, a stainless braided clutch line with fittings, and a stand-off for mounting the clutch line. No additional replacement parts or parts from the factory CMC are required. The kit has the necessary grease to lubricate the clevis pin and prevent NVH (noise, vibration, and harshness).

The OE Nissin CMC used in the kit has an aluminum piston body compared to the plastic assembly in older models. The plastic assembly has the potential to deflect in racing conditions or by using a stronger pressure plate. In 2002, Honda introduced a damper and delay valve in the clutch hydraulic system for US models with K-series powertrains. The damper in the CMC body casting, identified by the external triangular section, reduces vibrations transmitted to the clutch pedal, minimizing cabin NVH and vehicle feedback. We remove this damper to enhance the connection to the powertrain, resulting in increased pedal feedback and consistency at higher engine speeds and loads. This more direct connection is preferred by drivers and racers alike. Upgrading to our CMC kit will improve the pedal feel. However, it can make the entire system slightly more noisy under normal conditions.   

TECH SPECS:

  • Master Cylinder with clevis installed and pre-calibrated to OEM TSX specs & plated steel clevis 
  • Clutchline: The clutch line in the kit replaces hard and soft lines between the master cylinder and the slave cylinder.
  • Mounting hardware for the factory transmission point and two standoff clips for mounting the line to the driver-side frame rail are included. 
  • A neoprene firewall seal is included to prevent water and debris from entering the cabin. 
  • A 1oz packet of PTFE grease will be used on the pin that holds the clevis to the clutch pedal. The grease will reduce the NVH produced at the pedal assembly.   

Installation guide: Click here.

Hybrid Racing Clutch Master Cylinder Upgrade

$289.99

How fast is shipping?

Most orders placed on a weekday before 1pm EST will ship out the same day. Otherwise, it is common for parts to ship in 2-3 days from order date. Please note that both of these exclude special order items, which are clearly marked on product pages.

What is the returns policy?

Most products sold by Axion Industries LLC are covered by our Standard Return Policy and may be returned within 30 days of the original invoice date for a refund. Please note that a restocking fee will apply (see "Refunds Policy" in FAQ).

All returns require written approval from Axion Industries LLC. Original Shipping and return shipping charges are strictly non-refundable. For more information regarding our shipping refund policy, please refer to the "Refunds Policy" on FAQ.

Does it come with a warranty?

Axion Industries LLC does not offer any type of warranty coverage for defective products except those that are manufactured by us. However, the majority of the products available through our website are covered separately under a manufacturer's warranty.

If you recently purchased a product from Axion Industries LLC and are concerned about the fitment or performance of your item, please contact us for assistance.

Our customer service representatives can provide limited support, advice, and assistance identifying the possibility of any manufacturer defects. If we suspect your product does have serious defects, our customer service department can serve as a contact with the manufacturer to help arrange a warranty inspection and, if applicable, any necessary repairs or replacement shipments.

If you wish, you may also contact the manufacturer directly for information regarding product eligibility and specific terms and conditions of warranty coverage.

What happens if I want to cancel?

Unfulfilled, cancelled orders will require a 10%-30% cancellation fee unless you choose store credit (a 5%-15% cancellation fee will apply in this case). This fee is to:

  1. Recover the processing fees for both the order you placed and the order
    you canceled.
  2. Cancellation fees imposed by the manufacturer, should the part be coming
    straight from them. OR
  3. Restocking fees, since the part now has to be resold.

The following may NOT be canceled:

  • Orders that are already fulfilled – the Returns Policy will apply.
  • Pre-orders - the Returns Policy will apply.
  • Special Order items that were approved for sourcing by the customer.
  • Items that are on sale and labeled "final sale" during that sale period.

Please see "Order Cancellation" under FAQ for more.