2150CC FIC HONDA S2000/ KSERIES FUEL INJECTOR CLINIC INJECTOR SET (HIGH-Z)

IS116-2150H

$914.00
$914.00
Shipping calculated at checkout.

I have read Axion's store policies on returns, refunds, and cancellations. I also understand that when marked on the product page, special order items may not be canceled for any reason.

  • Fully secure checkout
  • Trusted by thousands
  • Rated and reviewed

FITS: 2006 - 2009 Honda S2000, K series

Fuel Injector Clinic Injector Set: 4 x 2150cc Saturated / High Impedance Injectors.

BEFORE ORDERING: For aftermarket or other unusual setups please email us prior to placing your order to make sure you receive injectors that fit properly.

WARNING: DO NOT USE WITH VP Import, Q16 or OTHER MTBE OXYGENATED FUELS

The internal construction of this 2150cc/min injector includes a seal that has been found to swell when in contact with MTBE from oxygenated fuels like Q16 or VP Import. This swelling causes a significant reduction in flow through the injector and therefore renders it unsuitable for use with MTBE oxygenated fuels. Please be sure to follow the care instructions for these injectors, since there are potential corrosion issues that may arise from prolonged disuse while exposed to alcohol based fuels (E85, etc.)

Utilizing the latest injector technology and featuring state of the art matching with Data Match Technology . Great injector for E85 or other high volume fuels! These injectors do not require a resistor pack or P&H drivers.

This massive injector is in a class of its own when low end throttle response and short pulse width control is required. State-of-the-art Data Match Technology dynamic flow matching is used during the production of these injector sets due their large flow rate. This significantly improves the ECU's ability to control these injectors in the sub 2ms pulse width area, typical of idle and part throttle conditions.

Each injector is individually serial numbered and the results are provided on the Data Match Sheet providing the most complete flow matching and latency value information available in the industry today.  Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 90ºF fuel temperature using CF-16B calibration fluid. 

Fuel Injector Clinic injectors are set up to and include all o-rings needed to fit the factory application for the listed vehicle. Every injector is covered against failure caused by defects in original manufacture by our 12-month warranty.

This injector set contains high impedance injectors matched to the saturated injector signal generated by this vehicle's OEM ECU, OR is suitable for use with an aftermarket ECU made or set up for high impedance injectors.

INSTALLATION NOTES: This set of injectors requires you to change the injector plug on the wiring harness in your car. This can be done by soldering in the pigtails (included with purchase) to replace the plugs currently on your harness, or you can choose to purchase the optional plug-n-play adaptors which will convert from the type of plugs on these injectors to the plugs on your harness without any need for cutting or soldering.This plug conversion is made necessary because FIC always chooses to provide brand new, unused injectors for its performance applications.

Includes pigtails PGT DEN4 or add Plug & Play adaptors PADPDtoH4.

2150CC FIC HONDA S2000/ KSERIES FUEL INJECTOR CLINIC INJECTOR SET (HIGH-Z)

$914.00

How fast is shipping?

Most orders placed on a weekday before 1pm EST will ship out the same day. Otherwise, it is common for parts to ship in 2-3 days from order date. Please note that both of these exclude special order items, which are clearly marked on product pages.

What is the returns policy?

Most products sold by Axion Industries LLC are covered by our Standard Return Policy and may be returned within 30 days of the original invoice date for a refund. Please note that a restocking fee will apply (see "Refunds Policy" in FAQ).

All returns require written approval from Axion Industries LLC. Original Shipping and return shipping charges are strictly non-refundable. For more information regarding our shipping refund policy, please refer to the "Refunds Policy" on FAQ.

Does it come with a warranty?

Axion Industries LLC does not offer any type of warranty coverage for defective products except those that are manufactured by us. However, the majority of the products available through our website are covered separately under a manufacturer's warranty.

If you recently purchased a product from Axion Industries LLC and are concerned about the fitment or performance of your item, please contact us for assistance.

Our customer service representatives can provide limited support, advice, and assistance identifying the possibility of any manufacturer defects. If we suspect your product does have serious defects, our customer service department can serve as a contact with the manufacturer to help arrange a warranty inspection and, if applicable, any necessary repairs or replacement shipments.

If you wish, you may also contact the manufacturer directly for information regarding product eligibility and specific terms and conditions of warranty coverage.

What happens if I want to cancel?

Unfulfilled, cancelled orders will require a 10%-30% cancellation fee unless you choose store credit (a 5%-15% cancellation fee will apply in this case). This fee is to:

  1. Recover the processing fees for both the order you placed and the order
    you canceled.
  2. Cancellation fees imposed by the manufacturer, should the part be coming
    straight from them. OR
  3. Restocking fees, since the part now has to be resold.

The following may NOT be canceled:

  • Orders that are already fulfilled – the Returns Policy will apply.
  • Pre-orders - the Returns Policy will apply.
  • Special Order items that were approved for sourcing by the customer.
  • Items that are on sale and labeled "final sale" during that sale period.

Please see "Order Cancellation" under FAQ for more.