10th Gen Honda Civic Type-R FK8 Billet Intercooler Upgrade

PRL-HCR-IC

Color
$749.00
$749.00
Shipping calculated at checkout.

I have read Axion's store policies on returns, refunds, and cancellations. I also understand that when marked on the product page, special order items may not be canceled for any reason.

  • Fully secure checkout
  • Trusted by thousands
  • Rated and reviewed

FITS:

  • 10th Gen Honda Civic Type-R FK8
  • Variants, including RHD, international models, etc.

NOTE: Fits factory charge piping or pair with our charge pipe upgrade kit for optimal performance. 

DOES NOT REQUIRE TUNE CURRENT DESIGN RETAINS FACTORY INTERCOOLER BOLTS & HARDWARE  

It’s no secret that Honda’s 2.0L turbo Civic is extremely susceptible to heat-soak, especially when retaining the factory intercooler. Excessive heat-soak increases the risk of detonation and causes major power-loss due to high charge air and cylinder temperatures. These issues become even more prevalent with spirited driving and/or increased power outputs.

The PRL Motorsports intercooler upgrade decreases charge air temperatures while increasing potential airflow with its dense 26.5 x 3.5 x 7.25" 550+ horsepower-rated bar-and-plate core. Our intercooler core increases surface area by 85% and internal flow by 83% to allow optimal cooling and airflow. Billet machined aluminum end tanks maximize efficiency while looking as smooth as they flow! 

This intercooler utilizes factory mounting spots with our billet machined end tanks, as well as all factory air ducts/shrouds. To maintain consistency with most of our PRL product line, no cutting, fitting or trimming is required. Kits will come with all hardware needed for a seamless install. 

Kit Includes:

  • (1) Intercooler Assembly
  • (1) Cardboard Stencil w/ “PRL” Logo
  • (1) Cardboard Stencil w/ 'R "PRL" Logo
  • (2) Buna O-Ring  

Performance Gains:

  • Increased turbocharger spool 3 horsepower & 11 ft./lb. torque gains by simply bolting on
  • Major mid-range power gains 50+ F degree drop in post charge air temperature at peak
  • Average of 32 F degree drop in post charge air temperature Increased efficiency & consistency in power delivery Increased engine safety  
  • Intercooler to Charge Pipe Bolt(s) Torque Spec: 18 ft/lb

Instructions on using the stencil - If you plan to utilize the provided stencil to represent PRL on your intercooler:

  • Clean and make sure your intercooler is dry.
  • Place the cardboard stencil onto the front of the intercooler (Make sure the intercooler is not upside down, the PRL logo is on the driver's side end tank).
  • It is recommended to tape down the stencil to have a sharp logo and to avoid moving.
  • Mask off or cover the end tanks to avoid overspray.
  • Apply a high-temp engine enamel style spray paint (we recommend Duplicolor DE1635 Ford Semi-gloss Black, any color can be used)
  • Multiple coats may be needed to have full coverage, this varies per color.
  • Allow to dry 30-60 minutes before installing the intercooler.
  • If any mistakes are made, such as runs/overspray, acetone or paint thinner can be used to remove any unwanted paint or to remove the stencil entirely, though this will take some time.
  • Keep the stencil handy and in a safe spot without bending if you would like to refresh your intercooler after years of road debris.

PLEASE ALLOW AN ADDITIONAL 2 WEEKS FOR POWDER-COATED INTERCOOLERS TO SHIP! 

10th Gen Honda Civic Type-R FK8 Billet Intercooler Upgrade

$749.00

How fast is shipping?

Most orders placed on a weekday before 1pm EST will ship out the same day. Otherwise, it is common for parts to ship in 2-3 days from order date. Please note that both of these exclude special order items, which are clearly marked on product pages.

What is the returns policy?

Most products sold by Axion Industries LLC are covered by our Standard Return Policy and may be returned within 30 days of the original invoice date for a refund. Please note that a restocking fee will apply (see "Refunds Policy" in FAQ).

All returns require written approval from Axion Industries LLC. Original Shipping and return shipping charges are strictly non-refundable. For more information regarding our shipping refund policy, please refer to the "Refunds Policy" on FAQ.

Does it come with a warranty?

Axion Industries LLC does not offer any type of warranty coverage for defective products except those that are manufactured by us. However, the majority of the products available through our website are covered separately under a manufacturer's warranty.

If you recently purchased a product from Axion Industries LLC and are concerned about the fitment or performance of your item, please contact us for assistance.

Our customer service representatives can provide limited support, advice, and assistance identifying the possibility of any manufacturer defects. If we suspect your product does have serious defects, our customer service department can serve as a contact with the manufacturer to help arrange a warranty inspection and, if applicable, any necessary repairs or replacement shipments.

If you wish, you may also contact the manufacturer directly for information regarding product eligibility and specific terms and conditions of warranty coverage.

What happens if I want to cancel?

Unfulfilled, cancelled orders will require a 10%-30% cancellation fee unless you choose store credit (a 5%-15% cancellation fee will apply in this case). This fee is to:

  1. Recover the processing fees for both the order you placed and the order
    you canceled.
  2. Cancellation fees imposed by the manufacturer, should the part be coming
    straight from them. OR
  3. Restocking fees, since the part now has to be resold.

The following may NOT be canceled:

  • Orders that are already fulfilled – the Returns Policy will apply.
  • Pre-orders - the Returns Policy will apply.
  • Special Order items that were approved for sourcing by the customer.
  • Items that are on sale and labeled "final sale" during that sale period.

Please see "Order Cancellation" under FAQ for more.