Hondata FlashPro Accord 2018+ US 2.0 Turbo

Fits: 10th Gen Honda Accord 2.0T (US-only)

The FlashPro includes Windows-based software called, "FlashProManager", and connects from your laptop's USB port to your vehicle's diagnostic port.   

Features: 

• Programmable ECU interface
• Connects via OBDII diagnostic port
• USB 2.0 connection
• Works with Laptop or Desktop
• No ECU modification necessary
• 20 hours on board data logging memory
• Security Password
• FlashProManager Windows software
• Check and clear diagnostic codes
• Custom laptop gauges
• Dual calibration storage - upload from one of two calibrations stored in the FlashPro

Accord tuning features:

• Boost Flex Fuel for + 50 HP and + 100 lb-ft torque
• Fuel and ignition and many many more parameters VTEC window
• Rev, launch, and speed limiters
• Map tracing & lambda overlay

BEFORE ORDERING CHECK ECU COMPATIBILITY: To ensure that you order the correct FlashPro, we recommend to check that your ECU is supported. The ECU part number is located on the ECU, which is located in the engine bay near the battery. You may need to remove a plastic cover in order to see the sticker containing the part number.

Vehicle Model Accord Year 2018 + Market US Engine K20C 2.0 T Transmission AT/MT ECU Part Number:

• 6B2-(A51-A56)
• 6B2-(A61-A66)
• 6B2-(A01-A06)  

What sort of improvements can I expect?

The tune is designed to give a conservative yet exhilarating 10% improvement in performance. With this Hondata performance upgrade, your Accord will match the performance of many more expensive luxury cars. Your Accord gains anywhere from 10 to 40 hp everywhere, with the maximum gains not at the top of the rev range, but where you need it most at the low end of the rev range. Rapid acceleration is just a quick flex of the throttle pedal away. 91 or higher octane recommended.  

Specs:

Accord 10AT

• Stock Red
• Stage 1- Green Adds 25 hp and 25 lb-ft torque
• Stage 2 -  Grey Adds 45 hp and 40 lb-ft torque    

Accord 6MT

• Stock - dark blue
• Stage 1- light blue adds 10 peak hp (20-25 hp midrange) and 40 lb-ft torque
• Stage 2 - grey adds 45 hp and 40 lb-ft torque    

Accord 6MT Stage 2

• Stock - dark blue
• Stage 2- light blue adds 22 peak hp (40-50 hp midrange) and 85 lb-ft torque

 

Accord MT 2.0 Flex Fuel

Flex fuel kits are now available for the Accord from retailers like ProCivic. In combination with FlashPro Manager 3.4.0.0 or later the Accord becomes a fully flex fuel compatible vehicle. These tunes were developed on a completely stock MT and AT Accord. The Accord Flex-Fuel calibration will automatically adjust the tuning and boost levels to maximize the performance based on your ethanol content. 

• +50 HP
• +100 lb ft torque
• Flex fuel ethanol content analyzer required
• Has been tested to E40
• As the ethanol percentage increases the boost is decreased to stay within the limits of the fuel pump
• Flex fuel calculator https://www.hondata.com/flex-fuel-calculator

Explanation of MT dyno chart

• Stock - as stated
• E30 and FlashPro - E30, FlashPro and more boost
• E40 and FlashPro - E40, FlashPro and more boost

Gains:

• 66 hp
• 120lb-ft torque 
• 0-60 reduced by 0.5 seconds

Tech:

• Tested to E40
• Over E50 the boost is reduced based on the ethanol content to stay within the limits of the fuel pump

Explanation of AT dyno chart

The dyno chart is a little wavy because of the interaction of the AT and dyno. The MT dyno plot above gives a more accurate representation.

• Stock - as stated
• FlashPro - E10 pump gas and Stage 1 tune
• E40 and FlashPro - E40, FlashPro and more boost