{"product_id":"aem-tru-boost-x-gauge-type-controller-1","title":"AEM TRU-BOOST X Gauge Type Controller","description":"\u003cp\u003e\u003cstrong\u003eFITS\u003c\/strong\u003e: All Hondas and Acuras\u003c\/p\u003e\n\u003cp\u003eTru-Boost joins X-Series line, now with AEMnet for data logging and an internal 80PSIg MAP Sensor. The beloved Tru-Boost Gauge has been put to pasture, and is replaced with the new X-Series Tru-BoostX Boost Controller Gauge (PN 30-0352).\u003c\/p\u003e\n\u003cp\u003eThe Tru-BoostX Boost Controller Gauge delivers all of the features you loved about the original only now with AEMnet for data logging and a big, fat internal MAP sensor that can handle boost pressures up to 80 PSI of boost. \u003c\/p\u003e\n\u003cp\u003eThe Tru-BoostX Boost Controller gauge delivers digital accuracy but with the simplicity of a manual boost controller. All programming is done using the faceplate buttons and no laptop is required.  It also features a boost display gauge and boost controller in one!\u003c\/p\u003e\n\u003cp\u003eAEM’s specially designed Boost Control Solenoid and all necessary hardware is included.\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to program - no laptop required\u003c\/li\u003e\n\u003cli\u003eBoost control solenoid and all necessary hardware included\u003c\/li\u003e\n\u003cli\u003eOn-board 80PSIg MAP sensor - no upgrade kit needed for high boost vehicles\u003c\/li\u003e\n\u003cli\u003eTwo boost level settings and scramble boost setting\u003c\/li\u003e\n\u003cli\u003eWastegate open pressure setting for controlling boost spikes and faster spool\u003c\/li\u003e\n\u003cli\u003eDisplay boost levels in PSI, BAR or kPa\u003c\/li\u003e\n\u003cli\u003eOverboost protection and programmable alarms, ground output for optional LED warning light\u003c\/li\u003e\n\u003cli\u003ePeak boost level recall X-Series design for the best visibility (87% larger center LED and 33% larger face design)X-Series dimensions make it easier to install (0.825” overall depth, 0.20” cup depth)\u003c\/li\u003e\n\u003cli\u003eAEMnet CAN bus enabled for data logging (13 channels of data over 2-wire connection) Standard 52mm (2-1\/16”) cup\u003c\/li\u003e\n\u003cli\u003e24 programmable green outer LEDs\u003c\/li\u003e\n\u003cli\u003eAuto dimming sensor for ideal brightness day or night\u003c\/li\u003e\n\u003cli\u003ePositive locking connectors\u003c\/li\u003e\n\u003cli\u003eProgram Two Boost Levels + Scramble Boost Setting - Program two boost modes for different levels of performance (up to 80PSIg internal MAP sensor), and program a time-based scramble boost setting that is controlled using a switched input. You can also turn off the controller and use the gauge as a display.\u003c\/li\u003e\n\u003cli\u003eChange Wastegate Open Pressure - Ideal for reducing boost spikes and improving spool up\u003c\/li\u003e\n\u003cli\u003eDisplay Boost Levels in PSIg (PSI), BAR or kPa (PAS) - See your boost in the units you prefer, and scale the 24 outer LEDs to match your peak boost levels for the perfect sweeping motion\u003c\/li\u003e\n\u003cli\u003eSet Alarms and Display Peak Boost - Set the 24 green outer LEDs to flash based on boost pressure so you are alerted to an overboost condition. A ground output is included for triggering an optional LED warning light. Select the “B” button to see peak boost level and clear the value using the menu\u003c\/li\u003e\n\u003cli\u003eOverboost Protection Built In - Protects your engine from an overboost condition by shutting the boost control solenoid off until it is reactivated by you through the buttons on the faceplate\u003c\/li\u003e\n\u003cli\u003eIntegrated Error Protection - Alerts you to a fault if the boost control solenoid is shorted or disconnected so you are never left guessing whether the Tru-BoostX is operational\u003c\/li\u003e\n\u003cli\u003eDatalog using AEMnet CAN bus - Outputting channels over AEMnet provides so much more than just boost pressure!\u003c\/li\u003e\n\u003cli\u003eSend 13 channels of data over a 2-wire connection, including boost pressure, peak boost, boost target, boost scramble duty, overboost status, wastegate crack pressure, boost control solenoid status and more.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM Electronics","offers":[{"title":"Default Title","offer_id":51488636764448,"sku":"aem30-0352","price":389.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0795\/6883\/0752\/products\/aem-electronics-aem-30-4350-13173788278854_4000x.progressive__21205.1607478066.1280.1280.jpg?v=1690226801","url":"https:\/\/axionperformanceparts.com\/products\/aem-tru-boost-x-gauge-type-controller-1","provider":"Axion Performance Parts","version":"1.0","type":"link"}